Key jammed in lock - will not come out

This is what we find works best to keep your lock in its best working condition lubricate the lock cylinder. Do not use WD-40, WD-40 is a solvent, not a lubricant and will, in fact, remove any type of lubricant that is in the cylinder. Use a lubricant that has a silicone, graphite or Teflon base only. Make sure the lock cylinder is facing up and spray or pour the lubricant into the cylinder. Let it sit for 5 minutes. Place a rag on your workstation and turn the lock over onto the rag for a minute or so.  This should be done several times a year to keep your lock working properly.

If this does not correct the issue, please go to our website https://kryptonite.zendesk.com/tickets/new  and submit a request. Enter your contact information, a brief description of the issue and upload a picture of the cut lock and key and we will have a new lock shipped out to you. If you need to call a locksmith to remove the lock please send a copy of the receipt and we will reimburse you for the charges. The lock will come first then approximately 10-14 business days later and if applicable you will receive a prepaid debit card  (Canada and UK will received a check). .